Metal king size bed frame is the most basic support for your mattress and mattress. Robust and space saving, a metal bed frame can be used alone or connected to a decorative headboard. They are designed for simple configuration with a minimum of tools, so even a beginner should have no problem with the collapse of a metal bed frame. When it’s time to move, change rooms or just get a new bed, you need to collapse the structure of the metal bed.
Ideas for contract a metal bed frame, remove the mattress springs and the metal bed frame. Lean against the wall or take them to another room so you have room to work. Loosen the screws that connect the frame of the metal bed to the head of the bed. Tighten the screws and nuts aside in a plastic bag so you do not lose them. Pull the head of the bed out of the metal frame to get it out of the way and prevent it from scratching as you frame collapses.
Remove the end caps from the edges of the range rails with a flat-bladed screwdriver. End caps protect beds from rough metal edges. Pry out carefully so as not to scratch the finish. Put them in the hardware bag with the bolts. Separate the two sides of the structure of the metal bed. Simply push the sides of the frame towards each other, which will cause the pin and the hole system on the top and bottom of the frame to disengage. Guide the metal plug along the slot towards the opening. When the lines of metal pins with the hole, pull the two pieces apart.