Full-size loft bed plans are often best built themselves because there are very few commercially available loft beds, and most are built for double mattresses. Whether you want a larger loft bed for your child, or an adult sized loft bed for a vacation home, a full or double size loft bed is a project that can save a lot of floor space in your room in exchange for cheap supplies and an afternoon workforce.
Prepare the lumber
Cut timber to fit bed dimensions. If you don’t have a chainsaw, your garden or home improvement center will usually cut it for you cheaply. Sand all surfaces in your wood. Color or bets worked, if you like. If you choose to add this step, the rest of the project will take an extra day as you wait overnight for your cover to dry.
Place your four loft bed on the floor in a rectangle. Set shorter beams with the ends inside the longer beams. Position all beams so the narrowest side. Screw the beams together with two wooden screws per corner. Drill through the face of the longer beam and in the middle of the end of the shorter beam. Place the plywood sheet on top of your rectangular frame with all edges of the sheet level with all edges of the frame. Screw the plate into place with a screw in each corner, drilled down through the plywood into the beam below. Reinforce with a screw at the center of each edge of the mattress frame. Drill this screw down through plywood and into the beam below. For best results, run this screw for about 3/4 inches from the outer plywood.